Paper
1 May 1996 Demonstration of distributed strain sensing in production scale instrumented structures
E. Joseph Friebele, Charles G. Askins, Martin A. Putnam, P. E. Heider, R. G. Blosser, J. Florio Jr., R. P. Donti, J. Garcia
Author Affiliations +
Abstract
Loading experiments have been carried out on a flat panel and C-channels fabricated by the Continuous Resin Transfer Molding (CRTMTM) process. Arrays of fiber Bragg grating (FBG) strain sensors written during fiber draw were embedded in the structures, and the strains measured by these distributed sensors are compared with the results of surface-mounted resistance strain gages (RSG's) and FBG arrays. Reproducibility of the strains measured by an embedded FBG array was demonstrated during cyclical loading of a C-channel, and survivability and reliability of the array was established when the structure was loaded to failure. Discrepancies between the results reported by the embedded FBG's and surface- mounted RSG's and FBG's are attributed to deflections and/or distortions of the embedded FBG by the structural fibers during CRTMTM processing.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. Joseph Friebele, Charles G. Askins, Martin A. Putnam, P. E. Heider, R. G. Blosser, J. Florio Jr., R. P. Donti, and J. Garcia "Demonstration of distributed strain sensing in production scale instrumented structures", Proc. SPIE 2721, Smart Structures and Materials 1996: Industrial and Commercial Applications of Smart Structures Technologies, (1 May 1996); https://doi.org/10.1117/12.239118
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Composites

Fiber optics sensors

Structured optical fibers

Optical fibers

Array processing

Back to Top