Recovery of impact contact forces of composite plates using fiber optic sensors and neural networks

Farhad Akhavan; Steve E. Watkins; K. Chandrashekhara

doi:10.1117/12.255363

25 October 1996 Recovery of impact contact forces of composite plates using fiber optic sensors and neural networks

Farhad Akhavan, Steve E. Watkins, K. Chandrashekhara

Proceedings Volume 2839, Fiber Optic and Laser Sensors XIV; (1996) https://doi.org/10.1117/12.255363
Event: SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, 1996, Denver, CO, United States

Abstract

Real-time determination of contact forces due to impact on composite plates is necessary for on-line impact damage detection and identification. We demonstrate the use of fiber optic strain sensor data as inputs to a neural network to obtain contact force history. An experimental study is conducted to determine the in-plane strains of a clamped graphite/epoxy composite plate upon low-velocity impacts using surface mounted extrinsic Fabry-Perot interferometric strain sensors. The plate is impacted with a semi-spherical impactor with various impact energies using the drop-weight technique. The impacts did not produce apparent damage in the composite plates. The significant features of the strain and contact force response are contact duration, peak strain, strain rise-time and full-width at half maximum. We have designed and built an instrumented drop-weight impact tower to facilitate the measurement of contact force during an impact event. The impact head assembly incorporates a load cell to measure the contact forces experimentally. The load cell data is used to train a three-layer feedforward neural network which utilizes the back-propagation algorithm. The output of the neural network simulation is the impact contact force history and the inputs are fiber optic sensor data in two different locations and time in 10 microsecond intervals. The efficiency and accuracy of the neural network method is discussed. The neural network scheme recovers the impact contact forces without using any complex signal processing techniques.

Citation Download Citation

Farhad Akhavan, Steve E. Watkins, and K. Chandrashekhara "Recovery of impact contact forces of composite plates using fiber optic sensors and neural networks", Proc. SPIE 2839, Fiber Optic and Laser Sensors XIV, (25 October 1996); https://doi.org/10.1117/12.255363

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available