Paper
4 April 1997 Control of the surface plasma during pulsed laser cutting
Ulrich Bielesch, M. Napp, Johannes Heinrich Schaefer, Juergen Uhlenbusch
Author Affiliations +
Proceedings Volume 3092, XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference; (1997) https://doi.org/10.1117/12.270150
Event: XI International Symposium on Gas Flow and Chemical Lasers and High Power Laser Conference, 1996, Edinburgh, United Kingdom
Abstract
During pulsed laser cutting of aluminum with a repetitively pulsed carbon-dioxide laser a strong correlation between quality of the cut judged by the burr height and electron density of the laser induced plasma on the surface and in the kerf occurs. The electron density is supervised by an absorption experiment and can be adjusted by the pulse duration. A feedback loop based on a comparison between the actual absorption signal and an absorption set point on the one hand and a variation of the laser pulse duration on the other hand is developed to provide an in situ control of the quality of the cut. The system works suitable for different sheet thicknesses and for outlined cuts. The results of optimized cuts are introduced.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Bielesch, M. Napp, Johannes Heinrich Schaefer, and Juergen Uhlenbusch "Control of the surface plasma during pulsed laser cutting", Proc. SPIE 3092, XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference, (4 April 1997); https://doi.org/10.1117/12.270150
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Plasma

Laser cutting

Feedback loops

Pulsed laser operation

Carbon dioxide lasers

Digital signal processing

RELATED CONTENT


Back to Top