Paper
18 August 1997 Compression-molded three-dimensional tapered polymeric waveguides for low-loss optoelectronic packaging
Linghui Wu, Feiming Li, Suning Tang, Bipin Bihari, Ray T. Chen
Author Affiliations +
Proceedings Volume 3184, Microelectronic Packaging and Laser Processing; (1997) https://doi.org/10.1117/12.280559
Event: ISMA '97 International Symposium on Microelectronics and Assembly, 1997, Singapore, Singapore
Abstract
We report for the first time, 3D tapered polymeric waveguides fabricated by the compression-molding technique. Compression-molded polymeric waveguides presented herein provide a feasible solution to bridge discrete optoelectronic devices having the apertures of a few microns to hundreds of microns in both horizontal and vertical directions. One-cm long tapered channel waveguides with the cross-sections of 5 micrometers X 5 micrometers at one end and 100 micrometers X 100 micrometers at the other end were fabricated. These polymeric channel waveguides have a propagation loss of 0.5 dB/cm when the 632.8 nm He-Ne laser light is coupled from the small end to the large end and of 1.1 dB/cm when coupled from the large end to the small end. By confining the energy to the fundamental mode, when coupling from large end to the small end, a low-loss packaging can be achieved bidirectionally.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Linghui Wu, Feiming Li, Suning Tang, Bipin Bihari, and Ray T. Chen "Compression-molded three-dimensional tapered polymeric waveguides for low-loss optoelectronic packaging", Proc. SPIE 3184, Microelectronic Packaging and Laser Processing, (18 August 1997); https://doi.org/10.1117/12.280559
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymer multimode waveguides

Polymers

Waveguides

Optoelectronic packaging

Channel waveguides

Bridges

Fabrication

Back to Top