How to report light loss values for optical fibers used in fiber optic lighting applications

Andrew Bierman; Nadarajah Narendran; Nishantha Maliyagoda

doi:10.1117/12.327969

20 October 1998 How to report light loss values for optical fibers used in fiber optic lighting applications

Andrew Bierman, Nadarajah Narendran, Nishantha Maliyagoda

Proceedings Volume 3428, Illumination and Source Engineering; (1998) https://doi.org/10.1117/12.327969
Event: SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, 1998, San Diego, CA, United States

Abstract

This manuscript attempts to explain why reporting a single value for light loss or a single wavelength-dependent attenuation graph is of minimum use to the lighting specifying community. Experimentally it was found that the light loss for different diameter fibers of the same type with the same illuminator varied from 1.1 to 1.5 percent per foot. This is mainly attributed to the higher number of reflections at the core-cladding interface when light travels through a smaller diameter fiber compared to a larger diameter fiber. In a similar experiment it was found that the light loss for the same fiber, size and material, on three different commercial illuminators with the same 150-watt metal halide lamp varied from 1.4 to 2.4 percent per foot. The numerical aperture through which light is coupled into a fiber and the spectral uniformity at the common-end of the fiber can affect fiber attenuation. It is shown here that the color separation of a metal halide lamp has minimal impact on the light attenuation and thus the greatest light loss effect is due to the launch angle. Reporting a family of attenuation plots, as function of fiber diameter and launch angle would be more useful for predicting light loss and also for developing high efficiency fiber optic lighting systems.

Citation Download Citation

Andrew Bierman, Nadarajah Narendran, and Nishantha Maliyagoda "How to report light loss values for optical fibers used in fiber optic lighting applications", Proc. SPIE 3428, Illumination and Source Engineering, (20 October 1998); https://doi.org/10.1117/12.327969

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available