Paper
3 February 1999 Electro-optical voltage transformer
Yan Xu, Miaoyuan Ye, Ying Cui
Author Affiliations +
Abstract
The work introduces an optical fiber voltage transformer based on the Pockels effect. The transformer is different from a conventional electric-magnetic voltage transformer. A crystal BGO is used as sensor that is sealed in SF6 gas container; the measured signal is transferred by optical fiber in the Electro-Optical Voltage Transformer (EOVT). The principles and composition of EOVT is described here. The system consists of three parts: capacitive divider, optical sensor and electronics module. According to the analysis of factors that influence on the accuracy of measurement, the main ones, temperature and pressure of SF6, are corrected by means of signal digital process. The performances of 110kV EOVT were tested. The results show that the accuracy of EOVT could achieve 0.5 percent. Compared to a conventional electric-magnetic voltage transformer, the advantages of 110kV EOVT are higher accuracy, low cost, small volume, excellent dynamic characteristics and immunity from electromagnetic interference. In particular the low voltage is effectively isolated from the high voltage by means of the optical fiber.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yan Xu, Miaoyuan Ye, and Ying Cui "Electro-optical voltage transformer", Proc. SPIE 3541, Fiber Optic and Laser Sensors and Applications; Including Distributed and Multiplexed Fiber Optic Sensors VII, (3 February 1999); https://doi.org/10.1117/12.339097
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transformers

Crystals

Signal processing

Electro optics

Temperature metrology

Sensors

Optical fibers

Back to Top