Paper
7 April 1999 Measurement of optical absorptance according to ISO 11551: parallel round-robin test at 10.6 μm
Detlev Ristau, Uwe Willamowski, Herbert Welling
Author Affiliations +
Abstract
For an elaborate assessment of the laser-calorimetric standard practice described in the International Standard ISO 11551 'Test methods for absorptance of optical laser components' an extended international round-robin test has been performed. In contrast to a former experiment with a serial concept, in the present parallel test identical commercial sample sets have been sent to the partners after an initial measurement of absorptance at the coordinator, where the experiment was completed by a final inspection and second screening measurement of absorptance. The result of the round-robin test are compared and evaluated on the basis of standard evaluation techniques and alternative statistical methods. With the exception of a few deviations, which can be attributed to specific properties of the individual measurement systems, a good agreement of the absorption values was observed.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Detlev Ristau, Uwe Willamowski, and Herbert Welling "Measurement of optical absorptance according to ISO 11551: parallel round-robin test at 10.6 μm", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); https://doi.org/10.1117/12.344389
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Lithium

Standards development

Laser energy

Mirrors

Metals

Inspection

RELATED CONTENT

Progress in upgrading a long trace profiler at NSRRC
Proceedings of SPIE (October 25 2016)
Calibration procedures for a 10.6-um laser calorimeter
Proceedings of SPIE (July 02 1998)
A Calorimeter For Measuring 1-15 KJ Laser Pulses
Proceedings of SPIE (February 08 1985)
Method for the evaluation 3D noncontact inspection systems
Proceedings of SPIE (September 14 2011)
Evaluation of a round robin test on optical absorption at...
Proceedings of SPIE (November 20 1996)
Round-robin test on optical absorption at 10.6 um
Proceedings of SPIE (May 27 1996)

Back to Top