High-power testing of optical components for LIGO

Sanichiro John Yoshida; Alexander S. Gorlenko; David B. Tanner; David H. Reitze; Justin D. Mansell; Efim A. Khazanov; Oleg P. Kulagin

doi:10.1117/12.340151

25 February 1999 High-power testing of optical components for LIGO

Sanichiro John Yoshida, Alexander S. Gorlenko, David B. Tanner, David H. Reitze, Justin D. Mansell, Efim A. Khazanov, Oleg P. Kulagin

Author Affiliations +

Proceedings Volume 3736, ICONO '98: Quantum Optics, Interference Phenomena in Atomic Systems, and High-Precision Measurements; (1999) https://doi.org/10.1117/12.340151
Event: ICONO '98: Laser Spectroscopy and Optical Diagnostics: Novel Trends and Applications in Laser Chemistry, Biophysics, and Biomedicine, 1998, Moscow, Russian Federation

Abstract

The LIGO (laser interferometer gravitational-wave observatory) detector is a complex Fabry-Perot/Michelson interferometer, designed to detect gravitational waves (GW) from astrophysical sources. When a GW strikes the detector, the underlying space will be extended in one direction and contracted in the orthogonal direction. The LIGO detector is designed to detect this space-strain, as a relative change in the lengths of the mutually orthogonal arms. Because this strain is much smaller than the arm length (typically 1 part in 10²¹), each arm is in the form of an optical resonator, effectively increasing the arm length and, hence, its change for a given strain. The arm-length change is measured as the relative phase shift at the beam splitter. To cope with the tiny phase shift, LIGO detects it as a beat signal between a carrier frequency and a side band frequency at the signal port (also called the dark port) of the Michelson interferometer. The side band is generated by phase-modulating the carrier frequency; the modulation frequency is chosen, so that the side band is far off resonance with the resonators in the arms, while the carrier frequency is on resonance. In this way, the phase shift associated with a relative arm-length change can be detected as amplitude modulation at the modulation frequency.

Citation Download Citation

Sanichiro John Yoshida, Alexander S. Gorlenko, David B. Tanner, David H. Reitze, Justin D. Mansell, Efim A. Khazanov, and Oleg P. Kulagin "High-power testing of optical components for LIGO", Proc. SPIE 3736, ICONO '98: Quantum Optics, Interference Phenomena in Atomic Systems, and High-Precision Measurements, (25 February 1999); https://doi.org/10.1117/12.340151

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available