Paper
29 November 2000 Comparison of experimental results and numerical analysis of multicell stepped limiters
Landa Hoke, Brian R. Kimball, Richard A. Whalen, Gregory J. Kowalski, Barry S. DeCristofano
Author Affiliations +
Abstract
The application of a numerical algorithm to the design procedure of a multi-cell limiter (MCL) is discussed and calculated numerical results are compared to experimental results. This application illustrates the ability to predict optical limiting under circumstances that are comparable to the design process of a MCL. Both the optical limiting and the temperature profile through the MCL are determined for three design cases. Also, the numerical analysis is used to investigate thermal damage using the calculated temperature profile. The results illustrate the potential application of a numerical simulation in designing a MCL and that the accuracy of the numerical model is on the same order as the experimental uncertainties.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Landa Hoke, Brian R. Kimball, Richard A. Whalen, Gregory J. Kowalski, and Barry S. DeCristofano "Comparison of experimental results and numerical analysis of multicell stepped limiters", Proc. SPIE 4106, Linear, Nonlinear, and Power-Limiting Organics, (29 November 2000); https://doi.org/10.1117/12.408511
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Transmittance

Glasses

Beam propagation method

Polyurethane

Liquids

Refraction

Back to Top