Paper
15 November 2000 Calibration of photoelastic modulators in the vacuum UV
Theodore C. Oakberg, John G. Trunk, John Clark Sutherland
Author Affiliations +
Abstract
Measurements of circular dichroism (CD) in the UV and vacuum UV have used photoelastic modulators (PEMs) for high sensitivity (to about 10-6). While a simple technique for wavelength calibration of the PEMs has been used with good results, several features of these calibration curves have not been understood. The authors have calibrated a calcium fluoride PEM and a lithium fluoride PEM using the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory as a light source. These experiments showed calibration graphs that are linear but do not pass through the graph origin. A second “multiple pass” experiment with laser light of a single wavelength, performed on the calcium fluoride PEM, demonstrates the linearity of the PEM electronics. This implies that the calibration behavior results from intrinsic physical properties of the PEM optical element material. An algorithm for generating calibration curves for calcium fluoride and lithium fluoride PEMs has been developed. The calibration curves for circular dichroism measurement for the two PEMs investigated in this study are given as examples.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Theodore C. Oakberg, John G. Trunk, and John Clark Sutherland "Calibration of photoelastic modulators in the vacuum UV", Proc. SPIE 4133, Polarization Analysis, Measurement, and Remote Sensing III, (15 November 2000); https://doi.org/10.1117/12.406617
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Ultraviolet radiation

Calcium

Light sources

Lithium

Synchrotrons

Electronics

Back to Top