Pellicle-induced distortions in advanced optical reticles

William H. Semke; Lowell K. Siewert; Andrew R. Mikkelson; Eric A. Risius; Ning Tang; Roxann L. Engelstad; Edward G. Lovell; Jun-Fei Zheng; Giang T. Dao

doi:10.1117/12.410695

22 January 2001 Pellicle-induced distortions in advanced optical reticles

William H. Semke, Lowell K. Siewert, Andrew R. Mikkelson, Eric A. Risius, Ning Tang, Roxann L. Engelstad, Edward G. Lovell, Jun-Fei Zheng, Giang T. Dao

Author Affiliations +

Proceedings Volume 4186, 20th Annual BACUS Symposium on Photomask Technology; (2001) https://doi.org/10.1117/12.410695
Event: Photomask Technology, 2000, Monterey, CA, United States

Abstract

The development of pellicles for 157 nm lithography includes not only the determination of appropriate materials, but also the minimization of pellicle-induced distortions contributing to overlay error. In particular, the attachment of the pellicle to the reticle surface can cause both out-of-plane and in-plane distortions (OPD and IPD) which contribute to pattern placement errors. This research focused on identifying the mechanical characteristics of thin-film pellicles, and the effect of bonding the pellicle frame to the reticle. Several different pellicle designs and films were analyzed and compared, using experimental, analytical, and finite element (FE) methods. The pellicle film stress was determined via two experimental procedures. The first, a resonant frequency test, identified the natural frequencies and mode shapes. The film stress values were subsequently determined from their relation to the frequencies. In the second procedure, static measurements of the displaced shape due to applied loads were taken using an MTI Fotonic Sensor. The film stresses from these independent measurements were between 200 and 300 kPa. The effect of the pellicle bonding was determined interferometrically by measuring the change in OPD of the reticle. The OPD values corresponded to IPD magnitudes of approximately 10 to 20 nm. These distortions were also simulated with FE models to replicate the mounting process. Using these methods, alternative mounting schemes, procedures, and materials can be developed, tested, and analyzed to reduce distortions in future designs.

Citation Download Citation

William H. Semke, Lowell K. Siewert, Andrew R. Mikkelson, Eric A. Risius, Ning Tang, Roxann L. Engelstad, Edward G. Lovell, Jun-Fei Zheng, and Giang T. Dao "Pellicle-induced distortions in advanced optical reticles", Proc. SPIE 4186, 20th Annual BACUS Symposium on Photomask Technology, (22 January 2001); https://doi.org/10.1117/12.410695

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available