Paper
16 July 2001 Controlling macrovoid formation in wet-spun polyaniline fibers
Dali Yang, Andrei Fadeev, Phillip N. Adams, Benjamin R. Mattes
Author Affiliations +
Abstract
The mesoscopic morphology of wet-spun polyaniline fibers determines their mechanical strength. Macrovoid formation in the coagulation bath is responsible for poor mechanical properties of these fibers. The effects of polymer concentration, coagulation bath temperature, polymer molecular weight and coagulant on the morphology of wet-spun polyaniline fibers have been investigated. The fibers were spun from concentrated solutions of low/medium and medium molecular weight emeraldine base dissolved in N-methyl-2- pyrrolidinone containing heptamethyleneimine as a gel inhibitor. The impact of the fiber morphology on the mechanical properties of the fibers prepared under different conditions is studied. A wet-spinning method, which minimizes macrovoid formation in the polyaniline fiber, is reported, and consequently the strength of the unstretched polyaniline fibers increased dramatically.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dali Yang, Andrei Fadeev, Phillip N. Adams, and Benjamin R. Mattes "Controlling macrovoid formation in wet-spun polyaniline fibers", Proc. SPIE 4329, Smart Structures and Materials 2001: Electroactive Polymer Actuators and Devices, (16 July 2001); https://doi.org/10.1117/12.432691
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Diffusion

Water

Solids

Molecules

Chlorine

Hydrogen

Back to Top