Paper
31 August 2001 Nonuniformity correction using a flood technique and 1:1 mapping
Author Affiliations +
Abstract
Although the sparse grid Non-Uniformity Correction (NUC) technique can accurately correct individual emitters on a resistor array, it is not a good solution for all projection applications. Due to busbar robbing, the sparse grid NUC breaks down when a large number of emitters are turned on simultaneously. For this case, a more appropriate NUC data collection method is needed. This method involves measuring the entire resistor array at once with a 1:1 mapping between the projector and NUC sensor. Then busbar effects, measured during the NUC data collection, can be accounted for and corrected. This paper presents details pertaining to the flood NUC technique and results. This NUC system is implemented at the Kinetic Kill Vehicle Hardware In the Loop Simulator (KHILS) at Eglin AFB, Florida.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric M. Olson and Thomas P. Bergin "Nonuniformity correction using a flood technique and 1:1 mapping", Proc. SPIE 4366, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing VI, (31 August 2001); https://doi.org/10.1117/12.438099
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nonuniformity corrections

Resistors

Sensors

Floods

Black bodies

Point spread functions

Projection systems

Back to Top