Paper
4 October 2001 Proposal of interferometric display device driven by electrostatic force
Takeshi Hatsuzawa, Masanori Hayase, Toshiaki Oguchi
Author Affiliations +
Proceedings Volume 4564, Optomechatronic Systems II; (2001) https://doi.org/10.1117/12.444113
Event: Intelligent Systems and Advanced Manufacturing, 2001, Boston, MA, United States
Abstract
A new display device based on a micro-Fizeau interferometer (IDD: Interferometric Display Device) is proposed and trially manufactured. The mirror is suspended by leaf-springs so that it may move vertically when driven by a dc voltage - electrostatic force. The optical path difference between the half mirror and the bottom substrate is adjusted by the voltage, resulting in the optical interference. Contrast in the IDD can be changed by the voltage, and color can be displayed in the case of white light source. A 300micrometer-square half mirror made of SiO2 and Si substrate electrode/mirror is used for the construction of the IDD. A 4 by 4 array of the IDD is fabricated by using a bonding technique. An interferometric pattern in observed at a driving voltage of 200V dc. The frequency response of the device is confirmed more than 100Hz. The display quality is not sufficient at present because of the deformation of the half-mirror, however, it has a potential for lower driving energy and higher intensity of the pixels.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takeshi Hatsuzawa, Masanori Hayase, and Toshiaki Oguchi "Proposal of interferometric display device driven by electrostatic force", Proc. SPIE 4564, Optomechatronic Systems II, (4 October 2001); https://doi.org/10.1117/12.444113
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Interferometry

Silicon

Light sources

Interferometers

Etching

Numerical analysis

Back to Top