Performance evaluation of bending actuators made from electrostrictive graft elastomers

Ji Su; Robert C Costen; Joycelyn S. Harrison; Kenneth M. Newbury; Donald J. Leo

doi:10.1117/12.475154

11 July 2002 Performance evaluation of bending actuators made from electrostrictive graft elastomers

Ji Su, Robert C Costen, Joycelyn S. Harrison, Kenneth M. Newbury, Donald J. Leo

Proceedings Volume 4695, Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD); (2002) https://doi.org/10.1117/12.475154
Event: SPIE's 9th Annual International Symposium on Smart Structures and Materials, 2002, San Diego, California, United States

Abstract

Recently a new class of electrostrictive polymers, called electrostrictive graft elastomers, was developed at NASA Langley Research Center. In this work, the output force of a bending actuator made from electrostrictive graft elastomer was measured and modeled to understand the dependence of performance on device configuration. This understanding should lead to better actuator design and fabrication. The prototype bending actuator is 47micrometers thick and 8 mm wide. The output bending force at the tip was measured as a function of applied voltage and the distance from the tip to the holding stage. The output force at 2.1 kV increases from 124(mu) N at a length of 33.5 mm to 662(mu) N at 7 mm. Accourding to a small displacement, 5-layer, a strength-of- materials model, the output bending force of the actuator varies inversely with its length and directly with the square of the applied voltage. Consequently, the output bending force can be about 5 mN when the length of the actuator is reduced to 1 mm for application to micro- electromechanical (MEMS) devices. The experimental results will be presented and a method for enhancing the performance will also be discussed.

Citation Download Citation

Ji Su, Robert C Costen, Joycelyn S. Harrison, Kenneth M. Newbury, and Donald J. Leo "Performance evaluation of bending actuators made from electrostrictive graft elastomers", Proc. SPIE 4695, Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD), (11 July 2002); https://doi.org/10.1117/12.475154

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available