Paper
29 July 2002 Optimizing lidar dynamic range by engineering the crossover region
Author Affiliations +
Abstract
Accommodating the large dynamic range of lidar signals is always a challenge for optical engineers. Signals from low altitudes are much larger than signals from high altitudes because of their inverse-range-squared behavior, as well as atmospheric absorption and scattering. It is well known that the onset of received lidar signals with range can be controlled by adjusting the crossover of the laser beam into the receiver field of view. However, a careful analysis has shown that, in many lidar applications much of the system's dynamic range can be used up before the range where the crossover is complete. In addition, the analysis shows that defocus is the primary contributor to the geometrical overlap function in determining the range dependence of the signal, and that understanding defocus is necessary for the optical designer to optimize system performance. Examples are given to illustrate the improvements in dynamic range that can be achieved by optimizing the focus of a lidar receiver.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David W. Roberts and Gary G. Gimmestad "Optimizing lidar dynamic range by engineering the crossover region", Proc. SPIE 4723, Laser Radar Technology and Applications VII, (29 July 2002); https://doi.org/10.1117/12.476403
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

LIDAR

Transmitters

Pulsed laser operation

Image transmission

Photodetectors

Beam splitters

Back to Top