Paper
9 September 2002 High-performance shutter for space applications
Mariolino De Cecco, Stefano Debei, Gian Paolo Guizzo, Marco Pertile, Mirco Zaccariotto, Francesco Angrilli, Cesare Barbieri
Author Affiliations +
Abstract
A new concept of electromechanical shutter has been designed and qualified for the OSIRIS imaging system to fly onboard the Rosetta Mission, whose main scientific goal are the randez-vous and the study of the Comet Wirtanen. The shutter, is composed by two blades, driven by dedicated four-bar linkages, that are moved independently by two torque motors each mounted on the same shaft of an high resolution optical encoder. A dedicate fail safe mechanism is also integrated in order to make the shutter single point failure proof. The mechanism has been designed in order to fulfil high reliability with high performance. Reliability has been verified by life testing over 100000 cycles (factor 2 on expected operative cycles). Performance verified by calibration show that the minimum exposure time with a uniformity of 1/500 is 10 ms over a large sensitive area (about 30x30 mm). The exposure time can vary from 10ms to 5s. Scope of this paper is to present the mechanism and to demonstrate that it accomplishes the sciences and interfaces requirements.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mariolino De Cecco, Stefano Debei, Gian Paolo Guizzo, Marco Pertile, Mirco Zaccariotto, Francesco Angrilli, and Cesare Barbieri "High-performance shutter for space applications", Proc. SPIE 4771, Optomechanical Design and Engineering 2002, (9 September 2002); https://doi.org/10.1117/12.482160
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Camera shutters

Charge-coupled devices

Space telescopes

Reliability

Telescopes

Sensors

Cameras

Back to Top