Paper
4 February 2003 Control and network system of position actuators in LAMOST
Lisheng Ma, Zhenchao Zhang, Xiangqun Cui
Author Affiliations +
Abstract
In LAMOST project, the reflecting Schmidt plate (MA) and the spherical primary mirror (MB) are constructed with segmented mirrors. MA consists of 24 submirrors and MB consists of 37 submirrors. Three position actuators are mounted on the back of each submirror to support the submirror and maintain the co-focus of the submirrors. The position actuators are the critical components in the system. They must make precise movements under large loads. A set of position actuators for one submirror and its electronics system in the lab will be presented in this paper. The character of one actuator and the networking of handling its position will be described in the paper in detail. Adopt the field bus technology to combine these position actuators into a distributed control system. This paper gives a function description of the distributed system and an implementation and the performance of the experimental subsystem.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lisheng Ma, Zhenchao Zhang, and Xiangqun Cui "Control and network system of position actuators in LAMOST", Proc. SPIE 4837, Large Ground-based Telescopes, (4 February 2003); https://doi.org/10.1117/12.457951
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Control systems

Active optics

Electronics

Head

Mirrors

Segmented mirrors

RELATED CONTENT

Emulator for the W. M. Keck 10-m telescope
Proceedings of SPIE (July 01 1990)
WIYN telescope active optics system
Proceedings of SPIE (June 08 1995)
Experiment system of LAMOST active optics
Proceedings of SPIE (September 28 2004)

Back to Top