Mercuric iodide and lead iodide x-ray detectors for radiographic and fluoroscopic medical imaging

George Zentai; Larry D. Partain; Raisa Pavlyuchkova; Cesar Proano; Gary F. Virshup; L. Melekhov; A. Zuck; Barry N. Breen; O. Dagan; A. Vilensky; Michael Schieber; Haim Gilboa; Paul Bennet; Kanai S. Shah; Yuriy N. Dmitriyev; Jerry A. Thomas; Martin J. Yaffe; David M. Hunter

doi:10.1117/12.480227

5 June 2003 Mercuric iodide and lead iodide x-ray detectors for radiographic and fluoroscopic medical imaging

George Zentai, Larry D. Partain, Raisa Pavlyuchkova, Cesar Proano, Gary F. Virshup, L. Melekhov, A. Zuck, Barry N. Breen, O. Dagan, A. Vilensky, Michael Schieber, Haim Gilboa, Paul Bennet, Kanai S. Shah, Yuriy N. Dmitriyev, Jerry A. Thomas, Martin J. Yaffe, David M. Hunter

Author Affiliations +

Proceedings Volume 5030, Medical Imaging 2003: Physics of Medical Imaging; (2003) https://doi.org/10.1117/12.480227
Event: Medical Imaging 2003, 2003, San Diego, California, United States

Abstract

Mercuric iodide (HgI₂) and lead iodide (PbI₂) have been under development for several years as direct converter layers in digital x-ray imaging. Previous reports have covered the basic electrical and physical characteristics of these and several other materials. We earlier reported on 5cm x 5cm and 10cm x 10cm size imagers, direct digital radiography X-ray detectors, based on photoconductive polycrystalline mercuric iodide deposited on a flat panel thin film transistor (TFT) array, as having great potential for use in medical imaging, NDT, and security applications. This paper, presents results and comparison of both lead iodide and mercuric iodide imagers scaled up to 20cm x 25cm sizes. Both the mercuric iodide and lead iodide direct conversion layers are vacuum deposited onto TFT array by Physical Vapor Deposition (PVD). This process has been successfully scaled up to 20cm x 25cm -- the size required in common medical imaging applications. A TFT array with a pixel pitch of 127 microns was used for this imager. In addition to increasing detector size, more sophisticated, non-TFT based small area detectors were developed in order to improve analysis methods of the mercuric and lead iodide photoconductors. These small area detectors were evaluated in radiographic mode, continuous fluoroscopic mode and pulsed fluoroscopic mode. Mercuric iodide coating thickness ranging between 140 microns and 300 microns and lead iodide coating thickness ranging between 100 microns and 180 microns were tested using beams with energies between 40 kVp and 100 kVp, utilizing exposure ranges typical for both fluoroscopic and radiographic imaging. Diagnostic quality radiographic and fluoroscopic images have been generated at up to 15 frames per second. Mercuric iodide image lag appears adequate for fluoroscopic imaging. The longer image lag characteristics of lead iodide make it only suitable for radiographic imaging. For both material the MTF is determined primarily by the aperture and pitch of the TFT array (Nyquist frequency of ~3.93 mm^-1 (127 micron pixel pitch).

Citation Download Citation

George Zentai, Larry D. Partain, Raisa Pavlyuchkova, Cesar Proano, Gary F. Virshup, L. Melekhov, A. Zuck, Barry N. Breen, O. Dagan, A. Vilensky, Michael Schieber, Haim Gilboa, Paul Bennet, Kanai S. Shah, Yuriy N. Dmitriyev, Jerry A. Thomas, Martin J. Yaffe, and David M. Hunter "Mercuric iodide and lead iodide x-ray detectors for radiographic and fluoroscopic medical imaging", Proc. SPIE 5030, Medical Imaging 2003: Physics of Medical Imaging, (5 June 2003); https://doi.org/10.1117/12.480227

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available