Optimizing beam quality for x-ray computed mammotomography

Randolph L. McKinley; Martin P. Tornai; Ehsan Samei; Marques L. Bradshaw

doi:10.1117/12.480231

5 June 2003 Optimizing beam quality for x-ray computed mammotomography

Randolph L. McKinley, Martin P. Tornai, Ehsan Samei, Marques L. Bradshaw

Proceedings Volume 5030, Medical Imaging 2003: Physics of Medical Imaging; (2003) https://doi.org/10.1117/12.480231
Event: Medical Imaging 2003, 2003, San Diego, California, United States

Abstract

The purpose of this study was to determine the optimum beam quality in terms of kVp and filtration for a tungsten-target x-ray source for a newly developed cone beam computed mammotomography application. The optimized beam is expected to yield enhanced image quality along with a low dose, equal to or less than that of dual view x-ray mammography. X-ray spectra were computer generated for a range of tube potentials, filter materials, and filter and breast thicknesses. The uncompressed breast was modeled from 8, 12, and 16 cm thick tissue, and breast lesions were modeled as a 0.5 cm thick striated muscle mass and a 0.02 cm thick microcalcification. The detector was modeled as a digital flat-panel detector with a 0.06 cm thick CsI x-ray absorption layer. Figures of merit computed included the ratio of the mean beam energy post-breast to pre-breast as an index of beam hardening, ratio of lesion contrasts with and without filtering, and SNR/exposure. Tube potentials between 50 and 70 kVp provided continuous spectra that, when filtered with Z-filters between 56 and 62 yielded quasi-monochromatic x-ray spectra with optimal SNR/exposure and contrast while providing minimum beam hardening. Figures of merit improve with increasing filter thickness, but diminishing returns are seen beyond the 500th value attenuation layer. While uncompressed breast thickness affected absolute values of the measurement criteria, they had little effect on beam hardening and contrast ratio and did not alter the optimal operating range. Filter thickness near the 500th value layer is expected to be well within the operating range for an intended commercial x-ray tube, indicating that these highly attenuating filters can provide superior performance for mammotomography.

Citation Download Citation

Randolph L. McKinley, Martin P. Tornai, Ehsan Samei, and Marques L. Bradshaw "Optimizing beam quality for x-ray computed mammotomography", Proc. SPIE 5030, Medical Imaging 2003: Physics of Medical Imaging, (5 June 2003); https://doi.org/10.1117/12.480231

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available