Paper
26 June 2003 Precision control of poly-gate CD by local OPC for elimination of microloading effect on 0.13-μm CMOS technology
Tzy-Kuang Lee, Yao-Ching Wang, Min-hwa Chi, C. Y. Lu, C. H. Hsieh, R. G. Liu, H. J. Liao, S. S. Yang, Chih-Hao Chang
Author Affiliations +
Abstract
The yield impact by local non-uniformity of poly-gate CD, edge profile, and transistor performance (between larger pitch area and minimum pitch area) is no longer tolerable in advanced CMOS technology as illustrated in a 2M SRAM vehicle processed by 0.13um flow in this paper. Micro-loading effects shall be minimized for process steps in poly-gate loop (including poly patterning, hard-mask etching, photo-resist (PR) ashing, poly etching, hard-mask removal, wet clean, etc), so that the accumulated local non-uniformity can be minimized. Also additional OPC may be applied locally (on mask) to compensate the remaining local non-uniformity. Significantly higher yield of a vehicle (2M SRAM) is demonstrated by efforts from both minimizing micro-loading effect in process steps as well as applying additional local OPC.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tzy-Kuang Lee, Yao-Ching Wang, Min-hwa Chi, C. Y. Lu, C. H. Hsieh, R. G. Liu, H. J. Liao, S. S. Yang, and Chih-Hao Chang "Precision control of poly-gate CD by local OPC for elimination of microloading effect on 0.13-μm CMOS technology", Proc. SPIE 5042, Design and Process Integration for Microelectronic Manufacturing, (26 June 2003); https://doi.org/10.1117/12.485250
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical proximity correction

Transistors

Critical dimension metrology

Etching

CMOS technology

Amplifiers

Photomasks

RELATED CONTENT


Back to Top