Paper
18 August 2003 Experiments in ultrasonic flaw detection using a MEMS transducer
Author Affiliations +
Abstract
In earlier work we developed a MEMS phased array transducer, fabricated in the MUMPs process, and we reported on initial experimental studies in which the device was affixed into contact with solids. We demonstrated the successful detection of signals from a conventional ultrasonic source, and the successful localization of the source in an off-axis geometry using phased array signal processing. We now describe the predicted transmission and coupling characteristics for such devices in contact with solids, demonstrating reasonable agreement with experimental behavior. We then describe the results of flaw detection experiments, as well as results for fluid-coupled detectors.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akash Jain, David W. Greve, and Irving J. Oppenheim "Experiments in ultrasonic flaw detection using a MEMS transducer", Proc. SPIE 5057, Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, (18 August 2003); https://doi.org/10.1117/12.482382
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Microelectromechanical systems

Signal detection

Silicon

Ultrasonics

Solids

Phased arrays

RELATED CONTENT


Back to Top