Paper
8 December 2003 Fulgide-based WRE holographic materials: influence of the matrix on the fatigue process
Roger A. Lessard, Christophe Lafond, Geraldine Darderian, Jean-Luc Gardette, Agnes Rivaton, Michele Bolte
Author Affiliations +
Abstract
The reversible reaction that takes place in the writable, readable, erasable (WRE) photosensitive materials involving fulgides (ABERCHROM 540 and 670) was investigated with a photochemical and holographic approach. It appeared that the fatigue of the photosensitive material was strongly dependent on the properties of the matrix used as a support. This was precisely established both by spectroscopic monitoring (λmax, absorbancemax, photo-stationary state) and by following the diffraction efficiency η values. There was a nice correlation between the evolution of the spectral features of C isomer and of the η values all along the WRE cycles. This combined approach was applied to four different supports: PVK, PMMA, PEPC/PS and epoxy RESIN. So for both fulgides: (1) PVK, frequently used in optics, appears as being the worst one. The starting fulgides were destroyed after only a few WRE cycles. This was assigned to the intrinsic photoaging of PVK whose absorption in UV domain is far from negligible and leads to the formation of radical species able to attack the fulgide. (2) Holograms recorded in PMMA and PEPC/PS present similar behavior with a loss of ≈10% after 8 cycles. (3) Epoxy RESIN appears to be a very good candidate for these reversible systems; no fatigue was observed after 40 cycles. It has to be attributed to the matrix in which the detrimental rotation process, giving rise to the non photochromic Z isomer, is strongly inhibited.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roger A. Lessard, Christophe Lafond, Geraldine Darderian, Jean-Luc Gardette, Agnes Rivaton, and Michele Bolte "Fulgide-based WRE holographic materials: influence of the matrix on the fatigue process", Proc. SPIE 5216, Organic Holographic Materials and Applications, (8 December 2003); https://doi.org/10.1117/12.508323
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Polymethylmethacrylate

Holography

Ultraviolet radiation

Absorption

Photosensitive materials

Absorbance

RELATED CONTENT


Back to Top