Two-way actuation of bilayer cantilever of nickel titanium and silicon nitride thin films by shape memory effect and stress relaxation

Edi Wibowo; Chee Yee Kwok; Nigel H. Lovell

doi:10.1117/12.521412

2 April 2004 Two-way actuation of bilayer cantilever of nickel titanium and silicon nitride thin films by shape memory effect and stress relaxation

Edi Wibowo, Chee Yee Kwok, Nigel H. Lovell

Author Affiliations +

Proceedings Volume 5276, Device and Process Technologies for MEMS, Microelectronics, and Photonics III; (2004) https://doi.org/10.1117/12.521412
Event: Microelectronics, MEMS, and Nanotechnology, 2003, Perth, Australia

Abstract

This study analyses the two-way actuation of a bi-layer cantilever of nickel titanium (NiTi) and silicon nitride thin films. The cantilever will curl on low temperature and uncurl on high temperature. the curling mechanism results from the stress relaxation of the NiTi film and the uncurling from the shape memory effect. A NiTi film with thickness of about 3 μm was deposited on a silicon substrate coated with a low-stress silicon nitride film with thickness of about 0.6 μm. the NiTi film was heat treated to recrystallise and memorise a flat shape. Over the heat treatment, residual stress built up in the NiTi film. The residual stress was measured to be around 400-800 MPa tensile by the wafer curvature method (Stoney's equation). The transformation temperatures of the NiTi film were measured to be about 36.3°C (A_p) and 32.6°C (R_p) by differential scanning calorimeter. The bi-layer cantilever was released from the silicon substrate by anisotropic wet etching (TMAH). Below R-phase finish temperature (<30°C) the shape memory effect was inactive and the NiTi film relaxed from the residual stress, which caused the cantilever to curl up. Above the austenite finish temperature (>50°C), the NiTi film uncurled toward its memorised shape because of the shape memory effect. Therefore, by cycling the temperature high and low, the cantilever uncurled and curled.

Citation Download Citation

Edi Wibowo, Chee Yee Kwok, and Nigel H. Lovell "Two-way actuation of bilayer cantilever of nickel titanium and silicon nitride thin films by shape memory effect and stress relaxation", Proc. SPIE 5276, Device and Process Technologies for MEMS, Microelectronics, and Photonics III, (2 April 2004); https://doi.org/10.1117/12.521412

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available