Paper
24 May 2004 Defect inspection of quartz-PSMs: taking a leap forward
Author Affiliations +
Abstract
Defect inspection of Quartz-PSMs is challenging, as the optical contrast for defects within the quartz substrate is small. The performance of three phase contrast algorithms is studied with a variety of defect test masks. For alternating phase shift masks key parameters such as optimum focus offset, defect sensitivity for different feature sizes, as well as defect sensitivity with respect to defect printability criteria are studied. In the studied range for two of the algorithms the defect sensitivity is independent of the feature size, whereas the third algorithm exhibited a decrease in sensitivity with decreasing feature sizes. In focus runs performed on large feature sizes a single optimum focus offset is observed, whereas for small feature sizes a two-path inspection using a positive and negative focus offset is found necessary. With respect to defect printability all critical 180° defects were found. For the newest of the three algorithms good inspectability of chrome-less PSMs is achieved.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan P. Heumann, Frank Schurack, Wolfgang Dettmann, Larry Zurbrick, and Michael Lang "Defect inspection of quartz-PSMs: taking a leap forward", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.534057
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quartz

Inspection

Photomasks

Defect detection

Defect inspection

Phase shifts

Algorithm development

Back to Top