Total test repeatability: a new figure of merit for CD metrology tools

Hugo Cramer; Ton Kiers; Peter Vanoppen; Jeroen Meessen; Frans Blok; Mircea V. Dusa

doi:10.1117/12.544249

24 May 2004 Total test repeatability: a new figure of merit for CD metrology tools

Hugo Cramer, Ton Kiers, Peter Vanoppen, Jeroen Meessen, Frans Blok, Mircea V. Dusa

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.544249
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

Evaluations of CD-metrology tools usually focus on resolution, repeatability and accuracy. These are traditional metrics which relate to the capability to measure a local line width. These metrics do not cover the capability to map the CD fingerprint (uniformity map) of the wafer and scanner field, which are essential for sub-100nm lithography process control. In this study, CD-uniformity wafers of state-of-the-art step-and-scan systems were measured with different metrology tools. Analysis of the results revealed a random contribution that could not be attributed to the exposure tool or to the repeatability of the metrology tool. A test and analysis method was developed to separate out this random contribution from the test results. The level of this random CD variation, called the Total Test Repeatability (TTR), is proposed here as a new metric to compare CD-metrology tools in their capability to generate CD uniformity maps. The method was applied to study CD-SEM, Electrical Line width Measurements and CD-scatterometry. In general, the TTR appears to be much larger than the metrology tool repeatability. As such it is an important figure of merit for CD metrology tools used to reveal fingerprints of reticles, exposure tools or processing tools. The TTR is dependent on the metrology tool, measurement algorithm, but also on materials and processing flow and conditions. Some root causes have been identified, such as the wafer resistivity properties for ELM or line width roughness that appears as CD variation in CD-SEM tools. Modifications can be made in the metrology strategy to suppress the TTR and reveal more reliable CD-uniformity fingerprints.

Citation Download Citation

Hugo Cramer, Ton Kiers, Peter Vanoppen, Jeroen Meessen, Frans Blok, and Mircea V. Dusa "Total test repeatability: a new figure of merit for CD metrology tools", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.544249

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available