Paper
12 April 2004 Nonuniformity correction and thermal drift compensation of thermal infrared camera
Olivier Riou, Stephane Berrebi, Pierre Bremond
Author Affiliations +
Abstract
In the last decade, a technology of thermal imagers was developing on the basis of new infrared detectors, as well for civil and military uses. These imagers implement miniaturised infrared detectors laid out in a matrix placed in the optical focal plane of the imager. The technology of the FPA associates the detector matrix to specific electronics allowing detection and addressing on each pixel. This technology allowed a fast improvement of the performance of the thermal imager. Nevertheless, their use in thermography measurement requires some metrological care. The principal problem is both the uniformization of the pixel’s response and the temporal stability of this uniformization. The second problem consists in the compensation of the thermal drift. In this paper, we present some practical solutions developed by CEDIP infrared systems to perform non uniformity and thermal drift corrections. Performance and limits are reviewed.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Olivier Riou, Stephane Berrebi, and Pierre Bremond "Nonuniformity correction and thermal drift compensation of thermal infrared camera", Proc. SPIE 5405, Thermosense XXVI, (12 April 2004); https://doi.org/10.1117/12.547807
Lens.org Logo
CITATIONS
Cited by 30 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nonuniformity corrections

Sensors

Staring arrays

Calibration

Temperature metrology

Black bodies

Thermography

Back to Top