Paper
28 September 2004 A 90-GHz array for use on the Green Bank Telescope
Author Affiliations +
Abstract
We are constructing an 8 by 8 bolometer camera, as a 90 GHz facility instrument for the 100 m Green Bank Telescope (GBT). The bolometers use transition-edge-superconducting (TES) sensors read out with a time-based SQUID multiplexing system. The receiver will be one of the first astronomical instruments to use such detectors. Our TES bolometers require cooling below 290 mK. To obtain these temperatures we use He3 and He4 sorption refrigerators that cycle from a two-stage pulse-tube cryocooler. The He3 stage has an operating temperature of 252 mK and a hold time of 77 hours with a 10 microwatt load. A combination of the large collecting area of the GBT and the low noise of the detectors will enable us to map 15 arcsecond by 15 arcsecond areas of sky to 200 microJansky in one hour.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simon R. Dicker, Peter A.R. Ade, Dominic J. Benford, Mark J. Devlin, Kent D. Irwin, Philip R. Jewell, Brian S. Mason, Samuel H. Moseley, Mark P. Supanich, and Carole Tucker "A 90-GHz array for use on the Green Bank Telescope", Proc. SPIE 5489, Ground-based Telescopes, (28 September 2004); https://doi.org/10.1117/12.580192
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bolometers

Telescopes

Sensors

Bandpass filters

Receivers

Atmospheric optics

Cryogenics

Back to Top