Paper
3 November 2004 Kinetic redundancy in dye-sensitized solar cells: the use of high-bandgap metal oxide barrier layers
Emilio Palomares, Alex Green, Saif A. Haque, James R. Durrant
Author Affiliations +
Abstract
Control of charge interfacial charge transfer is central to the design of photovoltaic devices. A an elegant approach to control those dynamics, is the use of an insulating metal oxide blocking layer at a nanocrystalline inorganic / organic semiconductor interface. We show that the conformal growth of a ~1 nm thick overlayer of MgO on a preformed nanocrystalline SnO2 film results in a ~4-fold retardation in the rate of charge recombination at such an interface This observation shows a good correlation with the current/voltage characteristics of dye sensitised nanocrystalline solar cells fabricated from such films, with the MgO coating resulting in ~ 50% improvement in overall device efficiency.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emilio Palomares, Alex Green, Saif A. Haque, and James R. Durrant "Kinetic redundancy in dye-sensitized solar cells: the use of high-bandgap metal oxide barrier layers", Proc. SPIE 5520, Organic Photovoltaics V, (3 November 2004); https://doi.org/10.1117/12.557172
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Dye sensitized solar cells

Metals

Interfaces

Oxides

Solar cells

Liquids

Back to Top