A simple focal-length measurement technique for adaptive microlenses using z-scan

Yasser Abdelaziez; Partha P. Banerjee

doi:10.1117/12.561300

14 October 2004 A simple focal-length measurement technique for adaptive microlenses using z-scan

Proceedings Volume 5523, Current Developments in Lens Design and Optical Engineering V; (2004) https://doi.org/10.1117/12.561300
Event: Optical Science and Technology, the SPIE 49th Annual Meeting, 2004, Denver, Colorado, United States

Abstract

A simple technique for focal length measurements of adaptive micro-lenses using z-scan is reported. Focal length is one of the most important parameters of any lens. The effective focal length is measured with reference to the principal points that are not easy to find especially for micro-lenses. In addition, variable focal length microlenses pose a different challenge that makes the process of determining their exact focal length a tedious and difficult process. Classical methods such as nodal slide and magnification have been used for focal length determination. Also, advanced Interference techniques such as Talbot, Moire, Digital Speckle, Zygo and Joint Fourier Transform were used for focal length measurements. These techniques require more elaborate setups and difficult to implement, especially for microlenses. Recently a power meter was used to find the focal length of an unknown lens. Most of the techniques mentioned above proof to be not simple for microlens characterization. The z-scan technique has been implemented, for quite sometimes, to characterize the third-order effects of a nonlinear optical material. The z-scan provides information on both the sign and magnitude of the non-linear refractive index and offer advantage of simplicity. We have used a regular lens to collimate and focus light unto the lens under test. By scanning the lens under test and measuring the on-axis intensity, one can find the focal length. This is because the on-axis intensity is proportional to the phase of the lens and therefore the focal length. In the case of an adaptive lens with its focal length is a function of the applied voltage, the scanning occurs for each voltage value that will correspond to the on-axis refractive index change and therefore the far field on-axis intensity. This described technique above is easy to implement and can achieve good accuracy due to the inherent sensitivity of the z-scan.

Citation Download Citation

Yasser Abdelaziez and Partha P. Banerjee "A simple focal-length measurement technique for adaptive microlenses using z-scan", Proc. SPIE 5523, Current Developments in Lens Design and Optical Engineering V, (14 October 2004); https://doi.org/10.1117/12.561300

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available