Paper
26 January 2005 Diode-pumped Cr:LiSAF laser with two-cavity-combined configuration
Author Affiliations +
Abstract
We propose and demonstrate a simple approach to lower the thermal quenching effect and improve the output power for Cr:LiSAF lasers, which is accomplished by employing two laser rods in a combined cavity. The resonator contains two laser rods and is designed by using two “X” folding cavities in cascade. CW laser output of ~ 230 mW has been achieved with pump of single-striped laser diodes. Compared with lasers with single gain rod, the laser with dual rods shows less severe thermal effect and increases the output by more than two times.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guoqiang Xie, Tao Wang, and Liejia Qian "Diode-pumped Cr:LiSAF laser with two-cavity-combined configuration", Proc. SPIE 5627, High-Power Lasers and Applications III, (26 January 2005); https://doi.org/10.1117/12.574277
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Thermal effects

Continuous wave operation

Mirrors

Resonators

Rod lasers

Diodes

RELATED CONTENT

Dynamically stable operation of a 100 watt level CW single...
Proceedings of SPIE (February 16 2018)
Diode side pumped TEM00 mode Nd YAG laser with plane...
Proceedings of SPIE (February 18 2009)
Nd YAG slab laser partially end pumped by diode laser...
Proceedings of SPIE (August 18 1997)
300W CW diode pumped Nd YAG laser with improved divergence...
Proceedings of SPIE (February 07 2008)
Low-threshold diode-pumped dye laser
Proceedings of SPIE (June 01 1994)
Modeling of diode end pumped cw and Q switched Nd...
Proceedings of SPIE (August 13 1993)

Back to Top