Accurate alignment technique for nanoimprint lithography

Li Jiang; Martin Feldman

doi:10.1117/12.600342

10 May 2005 Accurate alignment technique for nanoimprint lithography

Li Jiang, Martin Feldman

Author Affiliations +

Proceedings Volume 5752, Metrology, Inspection, and Process Control for Microlithography XIX; (2005) https://doi.org/10.1117/12.600342
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

The inherently high resolution of imprint lithography has the promise of extending integrated circuit minimum feature sizes down to the 10 nm region. However, the main effort of companies building nanoimprint tools has been directed to the development of robust printing techniques, rather than to alignment. Consequently, no alignment system currently exists for nanoimprint lithography that is capable of the alignment accuracy required by the semiconductor industry. This paper proposes a solution to the problem of obtaining accurate alignment over an extended imprinted area. On the one hand, alignment is difficult to perform when the mold template and the substrate are in contact, or nearly in contact. On the other hand, if they are widely separated, the accuracy is limited by the difficulty of simultaneously imaging fine features on both of them. However, by using orthogonal polarizations, sharp images of the template and substrate can be obtained when they are separated by 30 to 40 μm. Previous experience with a dual focus x-ray alignment microscope indicates that this alignment technique will readily meet the 18 nm 3 σ tolerance required by the semiconductor industry at the 45 nm node. Here the technique is adapted for nanoimprint lithography by employing transparent bulk mold materials (e.g. quartz) with opaque alignment targets on the surface. In addition, a flexure stage capable of reproducibly bringing the mold template and the substrate into contact is integrated into the system, so that after the alignment is performed it can be maintained during imprinting.

Citation Download Citation

Li Jiang and Martin Feldman "Accurate alignment technique for nanoimprint lithography", Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); https://doi.org/10.1117/12.600342

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE