Illumination optimization effects on OPC and MDP

Travis E. Brist; Steffen Schulze

doi:10.1117/12.600378

12 May 2005 Illumination optimization effects on OPC and MDP

Travis E. Brist, Steffen Schulze

Proceedings Volume 5754, Optical Microlithography XVIII; (2005) https://doi.org/10.1117/12.600378
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

Illumination optimization has always been an important part of the process characterization and setup for new technology nodes. As we move to the 130nm node and beyond, this phase becomes even more critical due to the limited amount of available process window and the application of advanced model based optical proximity corrections (OPC). Illumination optimization has some obvious benefits in that it maximizes process latitude and therefore makes a process more robust to dose and focus variations that naturally occur during the manufacturing process. By mitigating the effect of process excursions, there are fewer numbers of reworks, faster cycle times and ultimately higher yield. Although these are the typical benefits associated with illumination optimization, there are also other potential benefits realized from an OPC modeling and mask data preparation (MDP) perspective as well. This paper will look into the not so obvious effects illumination optimization has on OPC and MDP. A fundamental process model built with suboptimal optical settings is compared against a model based on the optimal optical conditions. The optimal optical conditions will be determined based on simulations of the process window for several structures in a design using a metric of maximum common depth of focus (DOF) for a given minimum exposure latitude (EL). The amount of OPC correction will be quantified for both models and a comparison of OPC aggressiveness will be made. OPC runtimes will also be compared as well as output file size, amount of fragmentation, and the number of shot counts required in the mask making process. In conclusion, a summary is provided highlighting where OPC and MDP can benefit from proper illumination optimization.

Citation Download Citation

Travis E. Brist and Steffen Schulze "Illumination optimization effects on OPC and MDP", Proc. SPIE 5754, Optical Microlithography XVIII, (12 May 2005); https://doi.org/10.1117/12.600378

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available