Switched-state control of a vibration isolation mount using ionomeric materials

Donald J. Leo; Juan M. Mejia-Ariza

doi:10.1117/12.599177

16 May 2005 Switched-state control of a vibration isolation mount using ionomeric materials

Donald J. Leo, Juan M. Mejia-Ariza

Proceedings Volume 5760, Smart Structures and Materials 2005: Damping and Isolation; (2005) https://doi.org/10.1117/12.599177
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

Materials that exhibit controllable modulus variations will enable new developments in applications in vibration suppression and shape change. In this paper we analyze a class of materials that exhibits reversible modulus variations due to solvent incorporation or removal. These materials, known as ionomeric polymers, have been shown previously to exhibit 20X changes in modulus depending on the hydration state of the material. A test fixture that allows a ionomeric polymer sample to be placed in a hydration controlled environment is developed. The Young's modulus of unplated materials and materials plated with metal is measured as a function of hydration level. A change of 2.56 and 3.89 times in modulus is obtained for the unplated and plated material, respectively. Experiments are performed to determine the ability to increase the stiffening rate of the polymer using applied electrical energy. Square input signals are applied to increase the elastic modulus of these materials. The rate of modulus change is higher or lower depending on the voltage amplitude and the forcing frequency of the input signal. Different kinds of solvents are used to control the modulus of the ionomer plated with platinum. Glycerol is the solvent with the highest modulus reduction (88.87%) and water is the smallest (67.71%). In addition, a test fixture consisting of a mass on a plate is built and modeled as moving-base. The change in stiffness is explored as a method to reduce unwanted vibration. The displacement transmissibility versus frequency is measured for water and acetonitrile solvents. The stiffness of Nafion 117 is computed when the solvents are applied and after they dry. The steady state response of the system is measured by applying a sinusoidal input signal. A forcing frequency of 94 Hz near the natural frequency is selected to produce a high amplitude. The displacement amplitude is reduced 5 times in 10 seconds after the application of the acetonitrile to the ionomeric polymer. These results demonstrate the basic feasibility of controlling the modulus in real time and quantify the time constants associated with hydration and dehydration of the material.

Citation Download Citation

Donald J. Leo and Juan M. Mejia-Ariza "Switched-state control of a vibration isolation mount using ionomeric materials", Proc. SPIE 5760, Smart Structures and Materials 2005: Damping and Isolation, (16 May 2005); https://doi.org/10.1117/12.599177

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Polymers

Platinum

Vibration isolation

Humidity

Vibration control

Control systems

Ceramics

Show All Keywords

Keywords/Phrases

Search In:

Publication Years