Paper
14 February 2005 Error analysis in the test of fast aspheric convex surfaces with a linear array of sources
Author Affiliations +
Proceedings Volume 5776, Eighth International Symposium on Laser Metrology; (2005) https://doi.org/10.1117/12.611831
Event: Eighth International Conference on Laser Metrology, 2005, Merida, Mexico
Abstract
To analyze the error obtained in the evaluation of the shape of the surface with the method that uses a linear array of sources, we performed a numerical simulation introducing Gaussian random errors in the coordinates of the centroids of the bright spots on the image plane, and in the coordinates of the sources (apertures of the mask). Here we found that to measure the quality of the surface with accuracy lower than 8 μm we have to place the sources with accuracy better than 0.5 mm, and measure the coordinates of the centroids with accuracy better than 0.5 pixels. Additionally, we performed an analysis of the aberrations effects on the evaluation due to a steep surface and the CCD camera lens. Here, we found that in the best image plane for all the image points the main aberration is astigmatism, which is symmetric and do not change the position of the centroid. Also, the analysis of the CCD camera lens was performed experimentally by the star test for different positions of the object in the visual field and for different apertures of the CCD diaphragm; here, in the worst case we observe changes in the positions of the centroid smaller than 0.46 pixels. In both cases, the aberrations are very small and have no influence on the determination of the centroids of the images. Finally, we analyzed the influence of the scattering at the surface have onto the evaluation. For this experiment, we observe that this effect can be considered as a very random error on the final evaluation of the surface.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Manuel Campos-Garcia and Rufino Diaz-Uribe "Error analysis in the test of fast aspheric convex surfaces with a linear array of sources", Proc. SPIE 5776, Eighth International Symposium on Laser Metrology, (14 February 2005); https://doi.org/10.1117/12.611831
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CCD cameras

Error analysis

Charge-coupled devices

Aspheric lenses

Monochromatic aberrations

Visualization

Light scattering

Back to Top