Design, fabrication, and measured performance of anti-reflecting surface textures in infrared transmitting materials

Douglas S. Hobbs; Bruce D. MacLeod

doi:10.1117/12.604532

18 May 2005 Design, fabrication, and measured performance of anti-reflecting surface textures in infrared transmitting materials

Douglas S. Hobbs, Bruce D. MacLeod

Author Affiliations +

Proceedings Volume 5786, Window and Dome Technologies and Materials IX; (2005) https://doi.org/10.1117/12.604532
Event: Defense and Security, 2005, Orlando, Florida, United States

Abstract

Rugged infrared transmitting materials have a high refractive index, which leads to large reflection losses. Multi-layer thin-film coatings designed for anti-reflection (AR), exhibit good performance, but have limited bandwidths, narrow acceptance angles, polarization effects, high costs, and short lifetimes in harsh environments. Many aerospace and military applications requiring high optical transmission, durability, survivability, and radiation resistance, are inadequately addressed by thin-film coating technology. Surface relief microstructures have been shown to be an effective alternative to thin-film AR coatings in many infrared and visible-band applications. These microstructures, etched directly into the window surface and commonly referred to as “Motheye” textures, impart an optical function that minimizes surface reflections without compromising the inherent durability of the window material. Reflection losses are reduced to a minimum for broad-band light incident over a wide angular range. For narrow-band applications such as laser communications, a simpler type of AR surface structure called a sub-wavelength, or "SWS" surface, is used. In general, both the Motheye and SWS surface textures will exhibit the same characteristics as the bulk material with respect to durability, thermal issues, and radiation resistance. The problems associated with thin-film coating adhesion and stress, are thus eliminated by design. Optical performance data for AR structures fabricated in fused silica, sapphire, Clear ZnS, ZnSe, cadmium zinc telluride (CZT), silicon, and germanium, will be presented.

Citation Download Citation

Douglas S. Hobbs and Bruce D. MacLeod "Design, fabrication, and measured performance of anti-reflecting surface textures in infrared transmitting materials", Proc. SPIE 5786, Window and Dome Technologies and Materials IX, (18 May 2005); https://doi.org/10.1117/12.604532

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available