Paper
23 August 2005 Opto-mechanical analysis for confocal laser scanning microscopes
Gao-Wei Chang, Ming-Jenq Twu, Yu-Hsuan Lin, Chia-Cheng Liao, Hung-Zen Kuo
Author Affiliations +
Proceedings Volume 5877, Optomechanics 2005; 587710 (2005) https://doi.org/10.1117/12.616640
Event: Optics and Photonics 2005, 2005, San Diego, California, United States
Abstract
The confocal imaging has become one of the most widely applied microscopic techniques in various fields, such as biotechnology, automation engineering, optical engineering, solid-state physics, metallurgy, integrated circuit inspection, etc. Confocal laser scanning microscopy (CLSM) is primarily based on the use of apertures in the detection path to provide the acquired three-dimensional images with satisfactory contrast and resolution. The major objective of this paper is to analyze the imaging performance of the confocal microscopes with varying opto-mechanical conditions. In this paper, the working principles of the one- and two-dimensional scanning mechanisms in the microscopic systems are first reviewed and verified by opto-mechanical simulations. Then, for the imaging performance, the tolerance to the fabrication and assembly of the optical components in conventional confocal microscopes is also investigated by simulations. The simulation results indicate the importance of eliminating the effects of stray light in the microscopic systems.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gao-Wei Chang, Ming-Jenq Twu, Yu-Hsuan Lin, Chia-Cheng Liao, and Hung-Zen Kuo "Opto-mechanical analysis for confocal laser scanning microscopes", Proc. SPIE 5877, Optomechanics 2005, 587710 (23 August 2005); https://doi.org/10.1117/12.616640
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Confocal microscopy

Microscopes

Sensors

Objectives

Point spread functions

Image processing

Laser scanners

Back to Top