Paper
19 May 2006 Design and parameter tuning of high precision diode laser temperature controller
Li Sun, Jian Bao
Author Affiliations +
Abstract
The emitting frequency of a diode laser is very sensitive to operating temperature. In the design of the temperature controller of a diode laser, it is important that the control parameters of PID should be tuned to match with the characteristic of the controlled target in order to get an optimal correcting effect. In the experiments, two methods of determining PID parameters, Ziegler-Nichols and critical level of proportion methods, were used, and the approximate same results were obtained. The measured result shows the controlling precision of the temperature controller is ±2m°C after PID parameters are tuned.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Sun and Jian Bao "Design and parameter tuning of high precision diode laser temperature controller", Proc. SPIE 6150, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 615029 (19 May 2006); https://doi.org/10.1117/12.676836
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Temperature metrology

Resistance

Oscilloscopes

Amplifiers

Laser stabilization

Semiconductors

RELATED CONTENT


Back to Top