Paper
18 April 2006 Simulation of apodized fiber Bragg gratings
Radek Helán, Břetislav Mikel
Author Affiliations +
Proceedings Volume 6180, Photonics, Devices, and Systems III; 61800O (2006) https://doi.org/10.1117/12.675663
Event: Photonics, Devices, and Systems III, 2005, Prague, Czech Republic
Abstract
This paper discusses methods for calculation properties of apodized fiber Bragg gratings (FBGs). These are one of the most enveloping optical devices in telecommunications and sensor systems. Work is aimed to simulation of FBGs, with utilization especially in sensor systems and laser interferometry for semiconductor laser stabilization at wavelength about 760nm. Program for FBG properties calculation was written in Matlab software. At first, FBG is divided into several uniform sections. To calculate properties of each uniform section is used coupled-mode theory. Coupled-mode theory is ordinary used for electromagnetic field specification in waveguides with periodic perturbations in the propagation direction. Next the transfer matrix method is used for overall properties calculation. The main point of simulation is reflectivity spectrum calculation in dependence of fiber dimensions and material properties. These FBGs have wide range of use in optical systems as band filters, in-fiber sensors or fiber grating lasers and amplifiers for their unique properties.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Radek Helán and Břetislav Mikel "Simulation of apodized fiber Bragg gratings", Proc. SPIE 6180, Photonics, Devices, and Systems III, 61800O (18 April 2006); https://doi.org/10.1117/12.675663
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Apodization

Refractive index

Reflectivity

Sensors

Optical simulations

Fiber lasers

Back to Top