Paper
18 May 2006 Standoff infrared detection of explosives at laboratory scale
Author Affiliations +
Abstract
An actively operated standoff infrared detection system was designed from commercial infrared equipment: VECTOR 22 FTIR (Bruker Optics), an external mirror and an external MCT detector. One type of experiment was done for IR detection of high explosives RDX and TNT on reflective surfaces. In the detection on surface, the samples were move to different distances and a beam of infrared light was reflect on surface in angle of ~ 0° (backward collection from surface normal). First the samples: 2 to 30 μg/cm2 of high explosives TNT and RDX were characterized after depositing on stainless steel reflective surfaces using Reflection-Absorption Infrared Spectroscopy (RAIS). Then targets were moved to increasing distances: 3 to 12 feet and remote-sensed spectra were collected in active reflectance mode. The limits of detection were determined for all distances measured in both nitroexplosives. Limit of detection of 18 and 20 μg/cm2 for TNT and RDX respectively in the longest distances measured.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Leonardo Pacheco-Londoño, Oliva M. Primera-Pedrozo, Michael Ramírez, Orlando Ruiz, and Samuel P. Hernández-Rivera "Standoff infrared detection of explosives at laboratory scale", Proc. SPIE 6206, Infrared Technology and Applications XXXII, 620634 (18 May 2006); https://doi.org/10.1117/12.666535
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Explosives

Sensors

Reflectivity

Infrared radiation

Standoff detection

Distance measurement

FT-IR spectroscopy

Back to Top