Paper
14 December 2006 Lateral force contrast for the detection of hydrophilic beads embedded within a PDMS surface
Peter Livingston, Tomoo Tsuzuki, Reinhard I. Boysen, Dan V. Nicolau
Author Affiliations +
Proceedings Volume 6416, Biomedical Applications of Micro- and Nanoengineering III; 641604 (2006) https://doi.org/10.1117/12.707690
Event: SPIE Smart Materials, Nano- and Micro-Smart Systems, 2006, Adelaide, Australia
Abstract
The Atomic Force Microscope (AFM) has been used for the characterization of polydimethylsiloxane (PDMS) surfaces with embedded, randomly dispersed micron-sized glass beads as a model system for a nano-topographical composite material with adjacent hydrophobic/hydrophilic areas. The use of lateral force microscopy (LFM) for the differentiation of regions within a composite material allowed for a mapping of the position of the hydrophilic glass beads, the determination of the height of the protruding beads and the surface area of the glass. Material properties of the PDMS were obtained from AFM contact-mode scans, contact angle measurements and from Fourier transform infrared spectroscopy for both, unexposed surfaces and surfaces exposed for 3 hours with a 185 nm deep UV light source. The UV exposure was found to have an effect on the lateral force signal via a change in the stiffness of the PDMS but the resulting lower contrast was still sufficient for the discrimination of the different regions.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Livingston, Tomoo Tsuzuki, Reinhard I. Boysen, and Dan V. Nicolau "Lateral force contrast for the detection of hydrophilic beads embedded within a PDMS surface", Proc. SPIE 6416, Biomedical Applications of Micro- and Nanoengineering III, 641604 (14 December 2006); https://doi.org/10.1117/12.707690
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Atomic force microscopy

FT-IR spectroscopy

Ultraviolet radiation

Silica

Composites

Polymers

Back to Top