Paper
1 November 2007 Piezoelectricity in PANI filled Nylon 11
S. A. Pande, D. S. Kelkar, D. R. Peshwe
Author Affiliations +
Proceedings Volume 6423, International Conference on Smart Materials and Nanotechnology in Engineering; 642326 (2007) https://doi.org/10.1117/12.779835
Event: International Conference on Smart Materials and Nanotechnology in Engineering, 2007, Harbin, China
Abstract
The piezoelectric response of pure Nylon 11 and conducting Polyaniline (PANI) filled Nylon 11 is presented. Nylon 11 samples were filled with PANI fillers of two different concentrations (1% and 5% w/w) each. The samples were poled using Corona discharge technique with poling field of 200 kV/cm and 350 kV/cm. The piezoelectric strain constant d31, stress constant e31 and electromechanical coupling coefficient k31 of pure and PANI filled samples were measured up to 100°C. The study suggests that the piezoelectric coefficient (d31) of the PANI filled Nylon 11 shows considerable decline with respect to its individual component. The thermal stability of the PANI filled samples improved and is almost stable at comparatively low temperature than pure Nylon 11.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. A. Pande, D. S. Kelkar, and D. R. Peshwe "Piezoelectricity in PANI filled Nylon 11", Proc. SPIE 6423, International Conference on Smart Materials and Nanotechnology in Engineering, 642326 (1 November 2007); https://doi.org/10.1117/12.779835
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Ferroelectric polymers

Polymers

FT-IR spectroscopy

Potassium

Polarization

Temperature metrology

Back to Top