Paper
31 May 2007 Wavefront correction and aberrations pre-compensation in the middle of Petawatt-class CPA laser systems
Federico Canova, Lorenzo Canova, Alessandro Flacco, Raphaël Clady, Jean-Paul Chambaret, Fabien Plé, Moana Pittman, Thomas A. Planchon, Marco Silva, Roberto Benocci, Gianni Lucchini, Dimitri Batani, Emeric Lavergne, Guillaume Dovillaire, Xavier Levecq
Author Affiliations +
Abstract
In this paper we describe the experimental validation of the technique of correction of wavefront aberration in the middle of the laser amplifying chain. This technique allows the correction of the aberrations from the first part of the laser system, and the pre-compensation of the aberrations built in the second part. This approach will allow an effective aberration management in the laser chain, to protect the optical surfaces and optimize performances, and is the only possible approach for multi-Petawatt laser system from the technical and economical point of view. This approach is now possible after the introduction of new deformable mirrors with lower static aberrations and higher dynamic than the standard devices.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Federico Canova, Lorenzo Canova, Alessandro Flacco, Raphaël Clady, Jean-Paul Chambaret, Fabien Plé, Moana Pittman, Thomas A. Planchon, Marco Silva, Roberto Benocci, Gianni Lucchini, Dimitri Batani, Emeric Lavergne, Guillaume Dovillaire, and Xavier Levecq "Wavefront correction and aberrations pre-compensation in the middle of Petawatt-class CPA laser systems", Proc. SPIE 6584, Adaptive Optics for Laser Systems and Other Applications, 658404 (31 May 2007); https://doi.org/10.1117/12.721581
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Deformable mirrors

Mirrors

Optical amplifiers

Modulation

Wavefronts

Laser systems engineering

Adaptive optics

Back to Top