Paper
14 May 2007 LER transfer from a mask to wafers
Hiroyoshi Tanabe, Ginga Yoshizawa, Yan Liu, Vikram L. Tolani, Koichiro Kojima, Naoya Hayashi
Author Affiliations +
Abstract
Contribution of mask line edge roughness (LER) to resist LER on wafers was studied both by simulations and experiments. LER transfer function (LTF) introduced by Naulleau and Gallatin was generalized to include the effect of mask error enhancement factor (MEEF). Low spatial frequency part of LTF was enhanced by MEEF while high spatial frequency part was suppressed due to the numerical aperture limit of a stepper. Our model was experimentally verified as follows. First LER of a mask was measured by a scanning electron microscope. Then the mask LER was multiplied by LTF to simulate the aerial image LER on wafers. It was confirmed that the simulated LER agreed well with the LER measured by AIMSTM. Based on our model the contribution of the mask LER to the resist LER on wafers was estimated. According to our estimation the requirement of the mask LER should be as tight as that of the resist LER on wafers.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroyoshi Tanabe, Ginga Yoshizawa, Yan Liu, Vikram L. Tolani, Koichiro Kojima, and Naoya Hayashi "LER transfer from a mask to wafers", Proc. SPIE 6607, Photomask and Next-Generation Lithography Mask Technology XIV, 66071H (14 May 2007); https://doi.org/10.1117/12.728964
Lens.org Logo
CITATIONS
Cited by 19 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line edge roughness

Photomasks

Semiconducting wafers

Line width roughness

Scanning electron microscopy

Light sources

Spatial frequencies

Back to Top