Paper
17 September 2007 Optical mount modifications for increased articulation at the Navy Prototype Optical Interferometer
Author Affiliations +
Abstract
Reconfigurations of the original optical mounts are required to facilitate the expanding capabilities and diverse science programs at the Navy Prototype Optical Interferometer. The mounts of current interest are tangent-arm gimbaled mounts located in vacuum chambers, remotely controlled, and precisely aligned through a narrow range of motion. In order to achieve the desired large changes in pathway reflections, the articulated range of the mount was increased from 4 to 45 degrees in elevation and from 4 to 90 degrees in azimuth. This increase was achieved on the elevation axis by fashioning and attaching a worm gear device, and a direct-drive type mechanism was used on the azimuth axis. The original alignment resolution and stability were preserved by retaining the high precision tangent-arm actuators. In this paper, we present the design modifications that achieved the form, fit, and function required for remote-controlled reconfiguration and alignment. The mechanical modifications, modes of operation, test results, and reconfigurations are described in detail.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James H. Clark III, Joshua P. Walton, F. Ernesto Penado, and Denver Smith "Optical mount modifications for increased articulation at the Navy Prototype Optical Interferometer", Proc. SPIE 6665, New Developments in Optomechanics, 666512 (17 September 2007); https://doi.org/10.1117/12.734171
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Actuators

Prototyping

Interferometers

Telescopes

Mirror mounts

Optical alignment

RELATED CONTENT


Back to Top