Design and fabrication of a single crystal silicon (SCSi) telescope: a success story

Douglas R. McCarter; Roger A. Paquin M.D.; Eloise McCarter

doi:10.1117/12.734453

17 September 2007 Design and fabrication of a single crystal silicon (SCSi) telescope: a success story

Douglas R. McCarter, Roger A. Paquin M.D., Eloise McCarter

Proceedings Volume 6666, Optical Materials and Structures Technologies III; 66660F (2007) https://doi.org/10.1117/12.734453
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

Silicon components such as mirrors and infrared lenses have been manufactured for many years, primarily from polycrystalline silicon (poly). There are inherent advantages that Single Crystal Silicon, (SCSi), has over poly, such as strength and dimensional stability, that make it more suitable for telescopes. However, there are challenges in the design of an all-SCSi telescope. SCSi is brittle and has low tensile strength compared to its compressive strength. These properties therefore dictate designs that minimize tensile stresses and eliminate direct mechanical attachments. McCarter has accepted these challenges and has designed and is fabricating a lightweight telescope that can replace one of beryllium at substantial savings of cost and schedule. The challenge of direct attachment has been solved with the use of bonded threaded inserts of low expansion metal. Bonding has been studied extensively as described in a companion paper, but the proprietary frit-bonding technique developed by Frank Anthony proved to be the most predictable, stable, and reliable. This technique is also used to fabricate complex components from an assembly of simpler parts. To minimize tensile stresses, the mechanical design had to be modified from the original without changing the optical prescription. This has been successfully accomplished through a "design for manufacturing" approach teaming designers, the stress analyst and manufacturing personnel. This approach has provided a design that is being produced at lower risk, lower cost and with higher predicted reliability with no loss in performance.

Citation Download Citation

Douglas R. McCarter, Roger A. Paquin M.D., and Eloise McCarter "Design and fabrication of a single crystal silicon (SCSi) telescope: a success story", Proc. SPIE 6666, Optical Materials and Structures Technologies III, 66660F (17 September 2007); https://doi.org/10.1117/12.734453

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available