Operational experience of contamination and damage of the larger aperture optics in the HELEN laser facility vacuum system at 1053 and 527 nanometres

James Andrew; Mark Girling; Nicholas Honiatt; David Scott; Paul Wallace

doi:10.1117/12.746743

20 December 2007 Operational experience of contamination and damage of the larger aperture optics in the HELEN laser facility vacuum system at 1053 and 527 nanometres

James Andrew, Mark Girling, Nicholas Honiatt, David Scott, Paul Wallace

Author Affiliations +

Proceedings Volume 6720, Laser-Induced Damage in Optical Materials: 2007; 67200P (2007) https://doi.org/10.1117/12.746743
Event: Boulder Damage Symposium XXXIX: Annual Symposium on Optical Materials for High Power Lasers, 2007, Boulder, Colorado, United States

Abstract

In this paper we review contamination and damage that has occurred since the HELEN laser was converted for use as a chirped pulse amplification (CPA) system. We concentrate on the largest components in the facility that operated in a vacuum environment in the short pulse (500fs) parts of the system. This experience will be valuable for planning commissioning and operations on the successor facility, ORION that is currently being constructed. The optical components located in the vacuum sections will be described. We have an interest in laser-induced damage and contamination from the long pulse only (~1ns), short pulse only (500fs) and combined regimes. For most of the operations the CPA system has operated at a wavelength of 1053nm (1ω). Some experiments have also been conducted with 527nm (2ω) CPA light derived by the use of a KDP doubling crystal. Damage to the infra red pulse compression gratings has occurred infrequently with a minority of high-energy shots. Contamination of multilayer dielectric plane turning mirrors has arisen from target disassembly. Focussing systems using off axis parabolic mirrors have sustained contamination from debris and a dielectric protected silver reflector used for green light suffered laser induced damage. Debris shields placed between the target and the parabolas have been used on selected experiments. The shields were anti-reflection coated with single layer, sol gel silica. These shields became contaminated on the target facing sides and in the case of 2ω operation also from blow off of the damaged mirror coating that caused a two-pass transmission loss in the system. A number of characterisation methods were used to evaluate and quantify the damage and contamination. These include macroscopic photography, microscopy, reflectometry and transmission spectroscopy.

Citation Download Citation

James Andrew, Mark Girling, Nicholas Honiatt, David Scott, and Paul Wallace "Operational experience of contamination and damage of the larger aperture optics in the HELEN laser facility vacuum system at 1053 and 527 nanometres", Proc. SPIE 6720, Laser-Induced Damage in Optical Materials: 2007, 67200P (20 December 2007); https://doi.org/10.1117/12.746743

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available