Enhancing direct-write laser control techniques for bimetallic grayscale photomasks

James M. Dykes; Calin Plesa; Glenn H. Chapman

doi:10.1117/12.765006

6 February 2008 Enhancing direct-write laser control techniques for bimetallic grayscale photomasks

James M. Dykes, Calin Plesa, Glenn H. Chapman

Proceedings Volume 6883, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics; 688312 (2008) https://doi.org/10.1117/12.765006
Event: MOEMS-MEMS 2008 Micro and Nanofabrication, 2008, San Jose, California, United States

Abstract

Novel grayscale photomasks are being developed consisting of bimetallic thin-films of Bismuth on Indium (Bi/In) and Tin on Indium (Sn/In) with optical densities (OD) ranging from ~3.0 OD to <0.22 OD. To create precise threedimensional (3D) microstructures such as microlenses, the mask's transparency must be finely controlled for accurate gray level steps. To improve the quality of our direct-write masks, the design of a feedback system is presented where the mask's transparency is measured and used to adjust the mask-patterning process while making the mask. The feedback would account for local variations in the bimetallic film and enhance the control over the mask's transparency such that >64 gray level photomasks become possible. A particular application of the feedback system is towards the production of beam-shaping masks. When placed in the unfocussed path for the photomask-patterning system, they can improve the consistency of the grayscale patterns by altering the laser to have a more uniform "top-hat" power distribution. The feedback system aids the production of beam-shaping masks since the processes of patterning, verifying, and using the mask are all performed using the same wavelength. In developing the feedback system, two methods were examined for verifying grayscale patterns. The first utilizes the mask-patterning system's focused beam along with two photodiode sensors; the second utilizes image analysis techniques on lower resolution microscope images. The completed feedback design would also account for drifts in the laser power used to pattern the bimetallic thin-film photomasks.

Citation Download Citation

James M. Dykes, Calin Plesa, and Glenn H. Chapman "Enhancing direct-write laser control techniques for bimetallic grayscale photomasks", Proc. SPIE 6883, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics, 688312 (6 February 2008); https://doi.org/10.1117/12.765006

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available