Paper
8 April 2008 Piezoelectric polymeric thin films tuned by carbon nanotube fillers
Author Affiliations +
Abstract
Piezoelectric materials have received considerable attention from the smart structure community because of their potential use as sensors, actuators and power harvesters. In particular, polyvinylidene fluoride (PVDF) has been proposed in recent years as an enabling material for a variety of sensing and energy harvesting applications. In this study, carbon nanotubes (CNT) are included within a PVDF matrix to enhance the properties of PVDF. The CNT-PVDF composite is fabricated by solvent evaporation and melt pressing. The inclusion of CNT allows the dielectric properties of the PVDF material to be adjusted such that lower poling voltages can be used to induce a permanent piezoelectric effect in the composite. To compare the piezoelectric characteristics of the CNT-PVDF composite proposed, scanning electron microscope (SEM) images were analyzed and ferroelectric experiments were conducted. Finally, the aforementioned composites were mounted upon the surface of a cantilevered beam to compare the voltage generation of the CNT-PVDF composite against homogeneous PVDF thin films.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junhee Kim, Kenneth J. Loh, and Jerome P. Lynch "Piezoelectric polymeric thin films tuned by carbon nanotube fillers", Proc. SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008, 693232 (8 April 2008); https://doi.org/10.1117/12.774256
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications and 4 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Ferroelectric polymers

Dielectric polarization

Dielectrics

Crystals

Polymers

Thin films

Back to Top