Paper
17 July 2008 Large capture range cophasing with the Liquid Crystal Tunable Filter
Author Affiliations +
Abstract
The construction of ELT primary mirrors requires the integration of a hundreds of segments.1, 2 A frequent substitution of some segment is foreseen allowing the primary alumimization. Mechanical integration has to reduce residual piston errors up to the capture range of optical cophasing sensors. Enlarging this range, will relax the mechanical integration requirements, speeding up meaningfully the integration operations. In this work we tested the performance of the Wavelength Sweeping Technique3 (WST): a cophasing technique that allow a large piston capture range, with any need of initial calibration. To apply the WST is necessary couple a Liquid Crystal Tunable Filter (LCTF) to a phasing WaveFront Sensor (WFS). In laboratory we measured segment edge steps on a MEMS-DM applying the WST to the PYramid Phasing Sensor4 (PYPS). We measured 72 wavefront phase steps from 0.5 to 3μm with an accuracy of less than 0.2μm. With numerical simulations we inquired the possibility to propagate WST edge step measures to cophase a segmented mirror. To do this we realized a cophasing algorithm and we compared its performace in different observing environments. The algorithm converges in 3 ÷ 5 iterations and all the residual edge steps on the mirror are in the capture range of high resolution cophasing techniques.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Bonaglia, E. Pinna, F. Quiros-Pacheco, A. Puglisi, and S. Esposito "Large capture range cophasing with the Liquid Crystal Tunable Filter", Proc. SPIE 7012, Ground-based and Airborne Telescopes II, 70123C (17 July 2008); https://doi.org/10.1117/12.790506
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Wavefronts

Phase measurement

Segmented mirrors

Sensors

Calibration

Modulation

RELATED CONTENT


Back to Top